Class Test Marks CIVIL 3RDY (G1) -CONCRETE -By M.ASIF

https://docs.google.com/spreadsheets/d/1P0PqwQsoH_8KvivHFQAAugPZRKV6D7DzkQfL18x6CsM/edit?usp=sharing

Minor time table updates: Applicable from Mon, Sep 1

Minor time table updates: Applicable from Mon, Sep 1

SCC workshop form

List of selected students will be displayed on Monday morning,1-sept-2014  and these students have to submit the respective amount in SET II 202 cabin 4 

https://docs.google.com/forms/d/1WdLMkPgsX4l1_V2cIVA0kB9dhHG1BtT4Km_wo5Hi_Fo/viewform?c=0&w=1&usp=mail_form_link

This form shall be available from now till midnight of Saturday.

ASSIGNMENT in FOUNDATION ENGINEERING for 3C by WASIM AKRAM

All students of 3C,
Please work out the assignment below and submit before the deadline.
https://docs.google.com/document/d/11np270vc1SdQI3Srfh-pEGEhH1FIum02eTesH8jTstQ/edit?usp=sharing

WASIM AKRAM
(CED,SET)

Assignment in concrete structures for class 3C by WASIM AKRAM

Please work out the assignment below and submit before the deadline.
https://docs.google.com/document/d/1IGII3Sw_xSosACfqlMhsdTfWxx0gsEXR6G9kYdtEahQ/edit?usp=sharing

WASIM AKRAM
(CED,SET)

Students of 3-D are requested to have first lecture ppt from the link below,it includes syllabus also but can ignore because I have already uploaded the revised one,and keep checking this blog your practice question sheet will be uploaded soon.

https://docs.google.com/presentation/d/162bTn3N1XEKkhvaOFFgpgg95K234sflxptCWObx6Xmc/edit?usp=sharing

For 3-D students, you can have the charts shown in class and syllabus of FOUNDATION ENGINEERING from the attachments below:

GRAIN SIZE DISTRIBUTION CURVE

PLASTICITY CHART

CONSOLIDATION CURVE

SYLLABUS OF FOUNDATION ENGINEERING

3D - Assignment 1 of Design of Concrete Structures

please download assignment 1 from the link below.

https://drive.google.com/file/d/0Bwy1ZhlP9e41Z1JqOFBka2ZJc3M/edit?usp=sharing

Nishant Kumar
CED
SET

IS 456(2000) by WASIM AKRAM,(CED, SET)

 All the students of  3C are requested to download  IS 456(2000)  code  from the link below and bring  hard copy of it with proper spiral binding.

https://drive.google.com/file/d/0Bwy1ZhlP9e41eUZtUEFkbHgyXzA/edit?usp=sharing

WASIM AKRAM
(CED, SET)

CMD workshop form

Those who wish to attend the CMD workshop could apply through the below form today between 0400pm and midnight,

Apply for the CMD workshop

The final list of students shall be displayed at the Department Notice Board and they will have to pay the registration fee in Cabin no.4, Room No. 202, SET2 between 0215pm to 0330pm.

Only 20 registration shall be accepted on first cum first basis.

Regarding GIS lab

Dear Students :-
All 3 yr students ( All sections A,B,C,D ) for their GIS lab have to come for their class at SET-II-303. If classroom is not vacant, wait for the teacher.
Thank You

Parag Agrawal
CED, SET

IS 456-2000 concrete design by chhavi gupta
unit-1 notes concrete design  by chhavi gupta
syllabus of concrete design by chhavi gupta

Updated Time table: Effective from Aug 25

Updated time table effective from Aug 25 can be accessed here.

Workshops in Sept (20th and 27th)

WORKSHOPS in September

We are arranging two workshops in the month of Sept. Both the workshops shall be conducted by Ambuja Cements and shall be held at their premises in Gurgaon.

The details of the workshop are as,

Concrete Mix Design

BY AMBUJA CEMENTS LTD.

20th September 2014

What is this workshop about?

The process of selecting suitable ingredients of concrete and determining their relative amounts with the objective of producing a concrete of the required strength, durability and workability, as economically as possible, is termed as the Concrete Mix Design. The proportioning of ingredient of concrete is governed by the required performance of concrete in 2 states, namely the plastic and the hardened states. If the plastic concrete is not workable, it cannot be properly placed and compacted. The property of workability, therefore, becomes of vital importance. Cement is several times costly than the aggregate, thus the aim is to produce as lean mix as possible. From technical point of view, rich mixes may lead to high shrinkage and cracking in the structural concrete, and to evolution of high heat of hydration in mass concrete which may cause cracking.There are other factors involved in relation to an ideal concrete mix design. Therefore, it is necessary to have adequate knowledge about Concrete Mix Design and this workshop is all about that.

Topics Covered

This workshop is split into 2 modules:

·   Lecture:  Aggregates for Mortar & Concrete, Essential properties & requirements of concrete, Correct steps of Concrete Mix Design

·   Practical session: Manufacturing process of Cement, Trial of Concrete Mix Design.

Detail schedule of the workshop can be accessed from this link

Fee for the workshop is Rs. 350/- for CESSU members and Rs. 400/- for non-CESSU members

Self Compacting Concrete

BY AMBUJA CEMENTS LTD.

27th September 2014

What is this workshop about?

Self-compacting concrete (SCC) is a flowing concrete mixture that is able to consolidate under its own weight. The highly fluid nature of SCC makes it suitable for placing in difficult conditions and in sections with congested reinforcement. Use of SCC can also help minimize hearing-related damages on the site that are induced by vibration of concrete. Another advantage of SCC is that the time required to place large sections is considerably reduced.

This workshop is all about learning mixture proportions for SCC and how it is different from those of ordinary concrete.

Topics Covered

This workshop is split into 2 modules:

·   Lecture:  Self Compacting Concrete - Concept & Design.

·   Practical session: Trial of Self Compacting Concrete Mix Design

Detail schedule of the workshop can be accessed from this link

Fee for the workshop is Rs. 350/- for CESSU members and Rs. 400/- for non-CESSU members

For both the workshops certificate shall be awarded by the Ambuja Cement Foundations.

Since the seats are limited to 30 participants in each of the workshop, the registration shall be purely on the "first-cum-first" basis.

Registrations,

For online registrations visit:  www.industryvsacademia.com

For Offline Registrations Contact:

Sachin Singh +918285569816

Abhinav Agarwal +918826070300

Ansab Nazeel +919899159708

Abhishek Kumar +917503818421

Please bring hard copies of IS 456:2000 in the  classes of concrete structures

3rd year syllabus

Below is the link for 5th term syllabus
https://drive.google.com/file/d/0Bwy1ZhlP9e41QlgySzlvLURzUzA/edit?usp=sharing

Time Table, student listing and syllabus

Time Table (effective from Aug 20), student listing and syllabus can be accessed here.

Kindly note that classroom for any section is not fixed and students will have to move from one room to another for lectures.